桌面水培系统：雨水灌溉

Desktop Hydroponic System: Rain Irrigation

2023-03-26 18:20:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This system is a remix and redesign of Matou_Makes Hydroponic Floodbox. You can download his original design here:
https://www.thingiverse.com/thing:4540792

This version of my desktop hydroponic system took the beautiful design that Matou_Makes created, and I modified to fit my preferred rain irrigation water system. No epoxy was used in my system. After 24 hours with a full water tank sitting on a paper towel there was no visible water leakage. Results may differ with different filament.

The water pump adapter was created specifically measuring the Songlong water pump which I listed its purchase link on this summary. Its diameter of the adapter side which plugs into the water pump is 9 mm. It will fit any pump that is slightly less than 9 mm. The diameter for the parts that hold the irrigation tubing is 6.5 mm. The tolerance of the irrigation tubing is a very tight so that when the water begins to flow, the tubing will not move. If you're having difficulty inserting the irrigation tubing into the printed lines, you may want to try warming the irrigation tubing with a blow dryer or sunlight to soften it. This will make it easier to insert.

This system is compatible with standard

...桌面水培系统：雨水灌溉

朋友，你觉得上面这个模型，属于下面的哪个分类？