60毫升油漆瓶架
60ml Paint Bottle Rack
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
A rack for 60ml paint bottles - optionally you can also store some brushes in the gaps between the bottles.
Note: The bottle holes are 35mm in diameter - 60ml bottles are usually slightly smaller than this, but make sure they fit before printing.
There are many sizes available:
2x4, 4x2, 2x6, 4x3, 3x4, 3x6, 4x4, 4x6 (The 2x6, 3x6, 4x6 model requires a 256mm width buildplate.)
All models are designed to not have any angles that exceed 45 degrees, so no supports are needed to print.
Enjoy.
If you really enjoy my design and want to support me, you can buy me a coffee!
https://ko-fi.com/kdesigns101
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:No
- Supports:No
- Infill:15%
Tags
License
60ml Paint Bottle Rack
by Kdesigns101 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
布雄管道 PVC 100毫米2023-06-02
-
波利罗德 M80胶片机 49毫米滤镜适配套件2024-04-05
-
Morph Umarex Long 110弹珠地堡3D模型2024-04-12
-
简单线团支撑架2024-05-02
-
蒸汽战甲断路器球形支架适配器2024-05-02
最热下载
-
模块化抽屉 2.02023-03-26
-
3D模型:Easier Print LTT螺丝刀拉拔器2024-01-14
-
伊瑟宁加德骰子塔(奥斯坦克)2024-01-17
-
Articulated Snake2024-03-30
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
最新模型
-
RC拖车模型 1:10 比例 扭力臂长版2024-05-08
-
爱你的小茶杯狗2024-05-08
-
垃圾桶与购物袋挂钩 v42024-05-08
-
Reolink Duo 2/3电池适配器2024-05-08
-
Nambu-14 高模2024-05-06