Himmel英雄剑与披风扣件 - 悬浮之旅：超越终章 - FDM

Himmel Hero Sword & Cloak Clasp- Sousou no Frieren (Frieren: Beyond Journey's End) - FDM

2024-03-15 02:33:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Himmel's (replica) Hero Sword - Sousou no Frieren / Frieren: Beyond Journey's End

This build uses a piece of ¾" Schedule 40 PVC pipe to attach the Hilt to the Grip. If PVC pipe is unavailable, print the Connector piece.

The CloakClasp attaches to fabric with flatback pins (purchased separately https://www.amazon.com/BronaGrand-Pieces-Brooch-Safety-Silver/dp/B07C7QY259).

The sheath fits a 1" white belt.

Print 12 BladeAlignmentPinsx12 for the sword.

Print 2 BlueGemx2 for the sword.

Print 6 SheathAlignmentx6 for the sheath.

There is very little space between the sword and sheath and I HIGHLY recommend using superglue (thin & strong) to adhere the gems, not hot glue (bulky & weak).

Everything else is printed once and assembled with superglue/2-part epoxy adhesive. Model was made with 0.2mm tolerances between the parts. If things do not fit, you might need to sand things down slightly or tune your printer.

A general reminder to please respect the license this model has been posted under and that I do not endorse 3rd parties re-posting my files (I only maintain this, a MMF, and Printables Account). Thank you!