仿真气枪WE系列幻头部件套装
Airsoft WE G17 G18 G19 Slides
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Made models of slides that should work for airsoft WE G17, G18 and G19 replicas. The G17 and G19 slides should work with only the semi auto nozzle housing. The G18, G18C, G19A, G19C will only work with full auto nozzle housing. Do not put a slide with a full auto nozzle housing on a hammer assembly for a semi, it will get stuck and things might break getting it off. I know this from experience. Some break in time might be required for proper function. Some 3D printed barrels will stick and the ejection hole in the middle might need some sanding to get it to fit better.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Rafts:No
- Supports:Yes
- Resolution:0.2 mm
- Infill:60% Cubic
- Filament brand:
Hatchbox
- Filament material:
PLA
- Notes:
Used three walls to help increase structural strength. I usually print these at 0.2 mm resolution but might be able to print them at 0.3 mm.
Tags
License
Airsoft WE G17 G18 G19 Slides
by enone is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
乌克里乐五声音阶结构模型2024-03-19 -
统一制 PA6 NPL-Z-03 13.62024-03-29 -
末世未来人类防卫军：火炮部队（FDM友好版）2024-04-04 -
蚂蚁试管巢穴 - 试管通道 - 阿芙罗狄特巢穴2024-04-28 -
力量感十足的宙斯3D模型2024-04-29
最热下载
-
Valorant 杰特的姿态2023-03-26 -
Flex Dino钥匙链2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
任意立方体活动关节的一体打印外星人2025-07-19 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24