Corgi Ford Transit Wrecker - 吊装和拖拽组件

Corgi Ford Transit Wrecker - Lift and tow assembly

2024-03-15 04:39:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I found this tow truck in a collection of pre-loved toy cars that were brought into play for my young grandson. Unfortunately, it was missing the original towing crane assembly (photo 2). Photo 1 is a depiction of the original toy. The original jib was added to the body casting prior to the floor/chassis being riveted together. I did not want to disassemble the toy, so devised a replacement that would still pivot and make use of the spring steel finger. Image 3 shows CAD view revealing the hidden pivot detail. Images 4 and 5 show the two components separately.

The replacement consists of two components which are printed as a single assembly. It is then glued to the flat area behind the cab.

Images 6 and 7 show the end result. Note the indication of downward movement of the jib.

Print Settings

Printer brand:
Snapmaker
Printer:
Original
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
Medium layer (Luban)
Filament brand:
does not matter
Filament color:
Red
Filament material:
PLA
Notes:
I printed the component with the front face on the build plate (ie layers effectively run from front to back of the truck. This appeared to give better results for the hidden clearances for the pivot.

Post-Printing

After printing and removing the support material, I formed a hook from wire (eg, a paper clip or slightly larger diameter wire). The whole assembly was then glued to the plastic 'seat' behind the cab.

Corgi Ford Transit Wrecker - 吊装和拖拽组件

朋友，你觉得上面这个模型，属于下面的哪个分类？