安益拓科巴拉2极大版光丝适配器

Anycubic Kobra 2 Max Filament Adapter

2024-03-15 05:35:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made a 90° adapter so that with minimal changes the printer would fit into an enclosure.
https://www.thingiverse.com/thing:6458557

The original worked, but was too flimsy to hold the full spool for long. It also needed a guide roller.

I beefed up the adapter and merged it with a roller I had already produced (for a hornet) with the adapter. All was working fine until I started printing ABS and the adapter sagged.

I plan to connect it to the rail as well as the upright, until then I designed and printed a support that sits on the enclosure frame.

I used the original Spool holder and it fit, but it's TIGHT to lock on.

BTW. Some kind person wanted to tip me for the previous iteration. Its kind but unnecessary. For personal reasons I won't bore you with, please donate to Cancer research if you must.