One Plus 开屏 Nilkin 手机壳

One Plus Open Nillkin Case Camera Cover

2024-03-15 07:41:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I came up with this design after wanting to take pictures while using my Nillkin case and getting frustrated with having to open the cover every time.

Replacing the original cover is permanent so this is a warning, you will not be able to reattach your original cover after this process.

Do not do any work to the case while the phone is in the case, the process requires drilling, super gluing and plastic welding.

This is a two piece design, this effectively sandwiches the hinge system built into the lens cover.

Steps to attach to case:

Step 1: Drill out the 3 existing lens cover rivets. These rivets are hidden under a black crescent shaped sticker.
Step 2: Thread the new plastic "Rivets" on the printed lens cover through the lense cover hinge.
Step 3: Press fit the locker onto the plastic rivets so that the hinge is sandwiched between the two pieces.
Step 4: Close the cover so it's snapped into place.
Step 5: Check alignment and make any modifications necessary for a proper fit.
Step 6: Once alignment and fitment are confirmed, apply super glue to both the lens cover and locker. Press and hold the pieces together until the super glue is bonded.
Step 7: Using a 3D Print Pencil, Soldering iron, or other hot thing melt the plastic "Rivets" on the entire cover. These add additional structure to the cover.
Step 8: Refine and clean up the product with some 220 grit sand paper to your liking.