圆角模具

Round corner jigs

2024-03-15 10:01:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Special templates for using with router to make round corners. Radius 5mm and 10mm are outs (in one template), 20, 30 and 40 - outs and inners.

Print out the two parts, glue them together and fine-tune the working edges if necessary.

Source

The source is here.

How to use my configurable models in OnShape

To get an access to the thing source you'll need an account in OnShape. It can be free, so made it for yourself.

Go to the document by the specified link.

Go to the tab "print setup". There should be a few configurable values in the upper-left corner. Change what you need. Wait while rendering finished then export parts from this tab (see in the bottom-left corner). They already oriented in the best printing position.

Also some configuration options can be in other tabs. Check them if you wanted.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.4/0.25
Infill:
20% gyroid
Filament brand:
Greg
Filament color:
few colors
Filament material:
PLA
Notes:
Tip: set just 2 layers for the bottom. With significant time economy this is enough for stable printing, and the model will be durable after gluing.

Tags

round jig router

License

CC BY-NC-SA

Round corner jigs
by Vijit is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型