SD卡持有者恐龙 [Cura 5.7 通用 Cura项目]

SD Card Holder Dinosaur [Cura 5.7 Universal Cura Project]

2024-03-15 18:01:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

With the introduction of the Universal Cura Projects in Cura 5.7, it’s now possible to share model-specific cura settings with your model. A Universal Cura Project (UCP) can be loaded on all 3D printers available inside of UltiMaker Cura and it will only contain model-specific settings and modifier meshes that the creator of the file selected to ensure a successful print job for people with less experience.

You can read more about the Universal Cura Projects and which settings are included on our support page.

Examples of model-specific settings that are included are

Z seam Position
Monotonic Top/Bottom order
Enable Ironing
Infill Density
Infill Pattern
Support Structure
Support Overhang Angle
Build Plate Adhesion Type
Spiralize Outer Contour (Vasemode)

Are you curious to try it for yourself?
Download UltiMaker Cura 5.7 Beta here.

Do you have some feedback for Cura?
Leave a request on our GitHub.

The model has been designed by Zeeshan Mahmood, to demonstrate the Universal Cura Projects