紧凑型3D打印电力导线

Compact 3D printed Busbar

2024-03-15 18:43:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

What is it? A Compact 3D printed Busbar for 3mm eyelet connectors,The width is 43mm and the height is 40mm, Designed and made by me, I use it to distribute the positive and negative power wires that start from the lithium battery to where it is needed in the bot, You can see this in pic 3 eyelets with their wires connected to the busbars and in pic 4 you can see the cover closing it off, This cover is very important since it is a safety feature, It slips over the bars locking them in place and preventing shorts between them (Very important when dealing with lithium batteries) You attach this busbar to the wall or floor inside your project by means of an adhesive like super glue or even better (Since it gives you a chance before it sets) resin, What you will get when you order this thing is all in the second pic, The bottom bar holder, Two 3mm lock nuts for each bar, Four 3mm washers two for each bar, The top cover that closes everything off, Two 3mm self tapping screws to close off the cover, And two more 3mm washers for those self tapping screws(Always use washers when tightening screws on plastic)
Why did you make it? I need a small and compact way to distribute power in my new robotics rover platform but I could not find anything in the stores or online so I made this thing.
What makes it special? Well it is very compact 3D printable, And open source.