乐高技术级剪刀

Lego Technic Pliers

2024-03-15 19:53:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Designed to save your fingey tips from damage, These Brick (Leg-o)Technic style pliers come with 6X Technic holes, an Axle pushout, and Jaws with a cutout for either directly pulling of parts, or from the side of the Jaw.

Assembley Instructions:

Print 2X Plier Body parts (Optional: add modifier to remove second Axle Remover)

Print 1X Male Clip

Print 1X Female Clip

Optionally print Spring X1

place the pliers together at the hinge, placing the female clip inside the hole, add a small drop of superglue to the internal of the clip, then press the male side into the fitting, Pinch the fitting and work the pliers open and closed to prevent them gluing shut, then add the spring shoud you wish for them to open themselves.

Note: This item exists on Makerworld, also produced by myself, I would appreciate if you can, to download from Makerworld, as points mean prizes, but I understand not everyone wishes to sign up for accounts, hence the addition of this thingiverse profile too.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament brand:
NA
Filament color:
NA
Filament material:
NA
Notes:
Print with supports filling internal holes on the handles, The jaws do not need support, Print 2X Plier Body for complete set.