Tokara Tomy God Ginrai 组合器接口支撑套件

Tokara Tomy God Ginrai Combiner Port Supports/Heel Supports/Ankle Supports/Upgrade Kit

2024-03-15 23:54:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Free upgrade kit for Tokara Tomy God Ginrai. Create stable heel/ankle supports for Tokara Tomy God Ginrai with this upgrade kit. This upgrade kit utilizes the combiner port for a snug and sturdy fit.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
40%-100%
Filament brand:
Creality BFP
Filament color:
Gray
Filament material:
PLA
Notes:
• The upgrade kit fits perfectly on God Ginrai right off the printer if you print them correctly
• Turn ironing on in the slice settings. I used PrusaSlicer
• I had a brim on but this is optional
• Rectilinear infill pattern
• Print time should be around 2 hours with a 0.6mm nozzle

Post-Printing

Sanding

You will need 80-grit and 180-grit sandpaper. While this is optional, the part that is exposed to the bed may need to be sanded and smoothed as this is the exposed portion of the upgrade kit. Start by wet-sanding with 80. Once everything is smooth, wet-sand with 180 until smoother. Do not over-sand as this will expose the infill pattern. I suppose you could do 100% infill to counter this as it doesn't drastically affect the print time.

Total sanding time: 10-15 minutes for both pieces.

Tokara Tomy God Ginrai 组合器接口支撑套件

朋友，你觉得上面这个模型，属于下面的哪个分类？