重量级吉他墙挂架

Heavy Duty Guitar Wall Mount

2024-03-16 00:09:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

idden Screw Design. Fix bracket to wall then slot mount over

MUST print bracket laying down so layer grain runs the length or bracket
MUST print the mount standing up. If not, I can not guarantee the strength of the part.
0.2 layer height
Minimum of 3 wall thickness
20% Gyroid infill
The guitar mount works great in quality PLA, but stronger materials would be beneficial.
See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
Use suitable wall fixings to avoid failure.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Infill:
20% gyroid
Filament brand:
Overture
Filament color:
Any
Filament material:
PLA, PETG, ASA

Tags

bracket display Fender Gibson Ibanez stand

License

CC BY-NC-ND

Heavy Duty Guitar Wall Mount
by DT3D_PRINT is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.

重量级吉他墙挂架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载

Smart Pistol Kit for Airsoft ICS BLE XAE (Titanfall 2) (Tracer Unit Cover)
2023-03-26
ZTE MU5001 上位电容器
2024-01-10
吸血鬼之夜
2024-01-15
基础鸟饲料架
2024-04-30
幻想磁力
2024-05-03