蒸汽朋克风格USB闪存盘 - 真空管设计

Steampunk USB Flash Drive - (Vacuum Tube)

2024-03-16 00:37:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

But where does the water go?..

This Steampunk themed Vacuum Tube USB thumb drive glows a soft light when inserted into the base.

I tried to make the base modular so you could maybe design something in place of the gear ring .. who knows

The important part is the female receptacle and could easily be added to another project using a simple hole to mount, as long as you have enough room to work on the wiring.. oh yes don't forget the wiring .. this will challenge most people when it comes to removing the usb bits from the flash drive and soldering the wires ..

find you a standard USB 2.0 pin out chart on google there every where.

Materials	Count
#4 x 1/2" self tapping screws	17
#4 x 1/4" self tapping screws	1
USB A Male to A Female cable	1
Female 22-18 .110 spade quick connects	7
Male 22-18 .110 spade quick connects	7
Acrylic Tube 1 1/4" x 1" x 2" long	1
USB Thumb Drive 1gig	1
4" length Cat5e cable	1
Super glue or Model glue	1
5mm LED color of your choice	1
470 ohm resistor	1