11th Gen Honda Civic FOB 适配器

11th Gen Honda Civic Fob Adapter

2024-03-16 03:12:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter to allow me to use a key chain/lanyard that I liked with my incompatible car fob/key for my 11th Gen Honda Civic.

I designed this in Fusion 360. I printed this in Overture PETG and it feels plenty strong. Pieces were printed as oriented in the models. (Flat) I used organic tree supports in Bambu Studio with good results. This was printed with a P1S at a layer height of .12mm. I did not support the horizontal hole. I printed with 2 perimeters and 100% infill. I printed with a brim and slowed down the first layer to 20mm/s

I also tested printing this in PLA and it felt plenty strong as well.