Baratza Sette 30 - 51mm 夹持器

Baratza Sette 30 - 51mm portafilter holder

2024-03-16 23:21:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a 51mm portafilter holder for my Baratza Sette 30. I made this one because the factory arms are a bit finicky to position the portafilter on.

I rotated the holder 40 degrees in Cura and manually added some supports to the base in order to minimize warping. Your printer might not need it but in my case it helped.

If you want this model for a bigger portafilter, please comment and send me the outer diameter of your portafilter. I only have a 51mm so that's the only one I could make it for.