斯坦利刀片分支削切器 | 精准高效树木处理工具

Stanley blade branch cutter

2024-03-17 01:15:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a way to rapidly switch out blades as I wear out the sharpness. I use this to make a two round cuts in plant branches the very same manner that one would strip a wire. This is to create a top and bottom cut on the bark of a stem and then create a perpendicular cut to peel off the bark and prepare for root ball propagation. I just modified the bottom part to accept the various thickness of branches that I do most. I printed it with PETG and used the same screw and nut as the original version. It works great, just enough pressure to cut the top layer of the bark without cutting the hardwood. I use a separate blade to to make the vertical cut to join the two round horizontal cuts.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Resolution:
.20
Infill:
20%
Filament brand:
PRUSA
Filament color:
CLEAR
Filament material:
PETG
Notes:
I did not use supports for the bottom nut hole and no major issues found.