最终派系平躺标识牌支撑
Final Faction Flat Nameplate Stands
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These files are action figure stands for the standard action figures in the Final Faction toy line from Dollar Tree. Each figure has its own stand. The peg on the top of the stand is used on the left foot of the figure to allow it to stand securely for display or storage purposes. The pegs should work as printed, but may need to be sanded slightly if the fit is too tight. After all, these are Dollar Tree figures, so there may be some variation across the figures. :)
These stands were made to be printed without the need for supports.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1P
- Rafts:No
- Supports:No
- Filament brand:
Numakers
- Filament material:
PLA+
- Notes:
Layer Height: 0.1mm
License
Final Faction Flat Nameplate Stands
by Booney is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
沃尔芬（星狐零）模型2024-05-08 -
KSGER T12焊接站背板2024-05-08 -
可调节臀部垫（适用于HW97K）2024-05-06 -
6毫米螺母拱轮（适用于丰田RX350行李架）3D模型2024-05-06 -
34mm 管道卡 / DOPE 卡持有器 PRS2024-05-06
最热下载
-
苹果 HomePod mini壁挂装饰2024-03-19 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
基础鸟饲料架2024-04-30 -
F1赛船3D模型固定文件2024-05-08
