简洁的Thuma枕头支撑结构

Simple Thuma Pillowboard Support

2024-03-17 07:39:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The pillow board for the Thuma bed needs to be flush with the wall, but this isn't always possible, in my case because of a radiator which is in the way. These parts print as a single piece (or in the case of the version with a pin, 2 pieces) and without supports, while also adding 4 inches of height the the pillow board. A version which doesn't add 4 inches of height is also included. The pieces slide onto the ends of the frame, but there is also a version with a pin allowing the piece to slot in from the back. I recommend printing 4 but more or less may suite your needs. I've designed these to use the minimum material while still being extraordinarily strong using finite element analysis. The strange shapes at the corners around the bed frame are not a mistake, but instead make the design stronger by eliminating right angles. Please reach out to me if you have any questions.

If you want to edit the design and make sense of my terrible CAD here you go:
https://cad.onshape.com/documents/5d1e5be70fe84d4751d1ae61/w/331587a920f143632aa3a68e/e/28271764ce80414d4935f351?renderMode=0&uiState=65f4d8eb274ca90d64115daf

https://www.thuma.co/products/the-pillowboard