ADXL 345风扇安装架 - CR-6 SE/Max/CR-5 PRO Ender 3 Neo和V2 Neo

ADXL 345 Nozzle Mount - CR-6 SE/Max/CR-5 PRO Ender 3 Neo and V2 Neo

2024-03-17 08:21:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

ADXL 345风扇安装架 - CR-6 SE/Max/CR-5 PRO Ender 3 Neo和V2 Neo

Summary

Just a simple ADXL 345 Nozzle mount for the Creality CR6 SE and similar machines (machines with the same heat block). I did it because there are a lot of people that claim that it is better to have the ADXL 345 accelerometer nearest to the nozzle.

It will clip to the heatblock only if you have the silicone sock in place. I use a third party silicone sock (see image) but the stock one should work.

You are going to need:

M3 heated inserts x2
M3 5mm screws x2

You can print it in any plastic, but please REMEMBER TO REMOVE IT BEFORE PRINTING. I gave enough space for it to do not interfere with the probing that the CR6 SE and similar printers perform with the nozzle, so it should not be a problem to put it before homing and doing the input shaper calibration.

The .STEP has been provided so you can modify it to fit your needs.

Happy printing!