3D建模分析插头磁铁

anal plug magnet

2024-03-17 17:23:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WARNING:

This is a decorative toy and by any means not built for actual usage.
Don't be tempted to insert this part into any body openings.
Keep the sculpture away from children due to choking hazard.

The hole for the magnet is a press fit design, specifically for the magnets found in the "GIZEH" rolling papers. At least in Germany these packages are flying around everywhere. I would recommend pressing these magnets in with two pliers and a flat piece of metal. Otherwise, the hole can easily be enlarged.

total height: 24.5 mm

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
120
Infill:
cubic, 10%
Filament brand:
noname product
Filament color:
white
Filament material:
PLA, 1.75mm
Notes:
Printer: Ender 5 Pro,
Layer height: 0.12 mm,
Line width: 0.4 mm,
Brim: enabled (highly suggested!),
Nozzle temperature: 210°,
Bed temperature: 60°,
Bridging: enabled