3dsjs

SMA小型波束天线支架

SMA Antenna Mount (Window or Wall)

2024-03-17 21:26:39

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I needed a mount for an antenna with an SMA connection that I could stick to my window. This holder came out. It is built in such a way that it can be screwed tight (3mm screws) or secured with cable ties.

I stuck them to the outside of the window using Tesa Powerstrips for wet rooms. Holds extremely well!

The SMA connection is inserted from below and screwed tight from above. Then comes the antenna.

The distance is far enough for ground plane antennas for ADS-B or LoRa (Meshtastic).

Print Settings

  • Rafts:
    Doesn't Matter
  • Supports:
    No
  • Resolution:
    0,2
  • Infill:
    12%
  • Filament brand:

    Eleego

  • Filament material:

    PLA

Tags

License

CC BY-NC-SA

SMA Antenna Mount (Window or Wall)
by Monotron is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

SMA小型波束天线支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢