DJI Mavic Mini 1 2 SE 水上恢复系统

DJI Mavic Mini 1 2 SE water float recovery system

2024-03-17 23:35:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Finally, a month after buying the first drone, I couldn't find an abnormal solution to an emergency landing on water, so I did it myself. For those who don't want to buy it in China:

Use styrofoam parts so that the drone can land on the water. Do not worry, no additional foam parts are required - the Mini has a problem with wind resistance and when landing on water there is a chance that it will turn over if there are more than 2 foam skis. For this reason, I did not make the wings in a different configuration.

Post-Printing

After printing:

You need 2 little screws or superglue for good for better contact of the wing with the base. This is optional, the parts hold together quite well.
Add some photos later, but if need, send me a message.