小鸭子的小木轨

Little Duckis Little Roller Coaster

2023-03-26 18:32:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Welcome To Little Duckis Little Roller Coaster!

Lil ducki saw a fabulous roller coaster for little duckies on the internet and wanted its own! So here it is!

It includes stunning two turns (WOW!) and a highspeed lane never seen before (HUH!) - at least not seen by lil ducki ;-)

A short clip is available here: https://youtu.be/aND3CrYCoLA

Lil duckis incarnation here is the modified very fine model from Karan Arora https://www.thingiverse.com/thing:663362 provided under a CC license, thank you very much.

The modification includes a flat bottom with an optional M3 screw placement for additional weight and some scaling to fit to the ladder.

About the gears and the movement there is probably some help needed by some sanding and rasping to make the stuff work without too much friction, but by avoiding too much looseness too (especially making the ladder hang or drop into hefty jumps). If the gears move smoothly before adding the ladder, everything should work fine.

But anyway, it is about fun - for lil ducki and you ;-)

The parts marked with optional are for the geared motor driven fun where the motor with gear was some no name product from my fund, with no idea where it was ordered... But a search about "micro motor gear" should give a hint about some alike models.

The optional big gear has some spares for M5 screws forced in and some screws at the side going down when the ladder goes up can help as a counterweight.
nWell, this was a suggestion of lil ducki, nice idea - but it must not help :)

And as a print helper there is a simple 12 mm disc, which can be placed at small areas on the bed before slicing to help around adhesion trouble and can be easily cut off after printing.

I hope the parts provided will fit good enough without too much fiddling to provide happy rides!

Have fun!

10'2022: Added bn_drc-gear-hole-test.stl (a simple bar with two gear holes)
nto provide a gear test mount as a preflight check. So you can get a clue if
nthis gear and pin spacing will work for you.

小鸭子的小木轨

朋友，你觉得上面这个模型，属于下面的哪个分类？