G.E. VSCAN便携式超声波检查仪外壳

G.E. VSCAN PORTABLE ULTRASOUND CASE

2024-03-18 05:17:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A $4000 portable ultrasound device and GE does not make a protective case?
So I made one...
Case comes with built-in probe holder. Probe is not detachable so the case opening has to be large enough for it to pass through the case.
The hospital would not let me take the quite expensive device home so, I was working off of photocopies of each face.

Print Settings

Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
2wall, 0.4 nozzle, 0.24 layer height
Infill:
10% cubic
Filament brand:
Inland (Esun)
Filament color:
black mostly. I ran out swapped out white for the last few layers
Filament material:
TPU
Notes:
The probe holder does not print well without support... but with support it is a small pain to get out. You might want to opt to split it off in your favorite CAD or slicer.
But if you are willing to keep the holder it IS handy!