隐藏载具 VKB-STECS

Stowaway Mount for VKB-STECS

2024-03-18 06:14:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This a stowaway mounts for VKB STECS Throttle. the swing back and lock in postion to have your desk and legs free of any hotas!(mostly).

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
Yes
Resolution:
0.4 nozzle
Infill:
15%
Filament brand:
Bambulab
Filament color:
any
Filament material:
Use PLA or any very rigid plastc
Notes:
at least 6 walls and 6 top/bot layers on the "THR-base" use 10 walls and 10 top/bottom layers.

"THR-base" MUST be printed vertically for maxium strength

"THR-midlever-STEM.MODULE" is for attaching the STEM module, it must be printed flat so that the screw holes for the STEM are vertical. "THR-midlever-BASIC" must be printed vertically.

Post-Printing

M8x50mm screw quantity:2
M10x70mm screw quantity:2
608 bearing (get cheap ones) quantity:2
large assortment of M3 screws10-50mm long
large assortment of m3 nuts and washers
small assortment of m4 and m5 screws,washers, nuts, 5-20mm long
wood screws of your choosing (5mm diammeter) quantity 4
large amounts of mini rubber bands

You will need to create 4 differnt types of rubber band "posts" using the m3 crews and nuts and with m4 washers. an iexample of all 4 will be shown
DM me on discord for any questiosn "saltyy6975"

Give credit if you post any pictures.