链条磨损计量装置 - 达到0.5%至0.75%精度
Cycle chain wear gauge - 0.5%+0.75%
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I liked the original by corecode very much but read that chains for more than 10 sprockets should be changed at 0.5% stretch while chains for less than 10 sprockets can be changed after 0.75% stretch maximum. With this in mind, I have added the 0.75% gauge with text showing which side applies to >10 and <10 sprockets.
Push the double end into a chain link (this takes up play in the rollers) and check that the single end (indicated as <10: 0.75% or >10:0.5%) does not drop into the 5th link. If the gauge drops in easily, then you need a new chain.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:10%, zigzag
- Filament brand:
Creality
- Filament color:
Red
- Filament material:
PLA
- Notes:
Select Cura Wall line count to 3 minimum to ensure the spring end is solid.
Tags
相关内容
联系我们
热门推荐
-
高普瑞奥拉凯塔3D模型2024-01-06 -
网格化处理下的第二代风扇罩模型2024-04-05 -
卫生间门传感器2024-05-02 -
丰田22RE发动机Starer电机2025-08-08
最热下载
-
钥匙扣2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
街用迷你四驱车轮子2024-05-01 -
中指2025-05-17 -
比基尼模型2025-07-16
最新模型
-
兼容弩套件卡 十字弩2025-06-21 -
USB Type-C 防尘插头2025-05-17 -
霍尔门科olen传递仪式2024-05-08 -
创实 Ender-3s1 Y轴电机支架2024-05-08 -
单行式钻石钻袋持有器（10个插槽）2024-05-06