Vevor/JIELI 滑动门控制箱内部传感器/电容架

Vevor/JIELI Sliding Gate Control Box internal Sensor/Capacitor Bracket

2024-03-18 09:04:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was camping out in my living room with no electricity, hot water, or a shower in days, eating cold cans of black beans (they're pretty good with crushed red pepper) while living it up playing "Welfare Queen" wishing I too could "munch" on the latest and greatest iPhone whatever. Frozen peppers turn to mush when they thaw, because the cells are no longer GTG; Water expands when frozen, acting like cute little molecular Jaws of Life to make a little hole into a big hole. My neighbors had a problem with their electric gate opener, and then one of them stopped by to ask if I still do 3D printing so they wouldn't need to replace an entire assembly; of course I do, and I need cigarettes... and filament or material to make filament; 0.095 inch trimmer line or lots of plastic bottles will do.... preferably in the form of not-empty Steel Reserve or Old-E 800 plastic bottles. Trimmer line is probably better, for the nylon. So I sat in my truck running on fumes to charge my batteries while I measured and documented stuff.

REVA;

Sensor mounting holes moved up 4mm, big hole for other sensor removed.
Thicker underneath the terminal block mounting horizontal surface, because I didn't want to do support material
added second horizontal surface between the bracket "legs", because the original was bowed considerably; probably due to pressure applied while mounting magnetic sensor, which also led to me having a "customer".
added other fillet-like support for the capacitor mounting surface, because I didn't want to do support material, and I didn't like the little rectangular things that should have been chamfers or fillets.

"Work in progress" => When you have the source code, and other files; is it ever really final? I think not!

Should you decide to use my measurements, or my modifications, and you would like to help supply me at least nicotine, beer, toilet paper, and other necessities (i.e. new heads for my 73 XLCH Sportster soon to be a chopper) to keep me doing whatever it is that I do, mostly happily; $hitchcme is my Cashapp.

If you have farm equipment that needs approval from the manufacturer to run, where some nerd needs to run out to the middle of nowhere with their cute lil laptop and their POS Tesla; Tell me it's a submarine, and we'll get 'er underway.

If you're a company somewhere (anywhere), making the lowest component difficult to find/replace to trick customers into spending completely unnecessary quantities of money; I will win!

and Free Palestine!

Vevor/JIELI 滑动门控制箱内部传感器/电容架

朋友，你觉得上面这个模型，属于下面的哪个分类？