风浪引领者/卡通炸弹

Windwaker/Cartoon Bomb

2024-03-19 12:10:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

While working on my next big project, I got a little burnt out and wanted to just print something simple and fun: One of the classic Zelda Bombs. However, most of the ones I found weren't exactly what I was looking for.

So I made my own. I wanted to add a bit more detail to the fuse than others I'd seen to make it look more like rope that was being burned at the end.

It's in three pieces (the bomb, the cap/fuse, and the pin for assembly), so it should be very easy for you to print in any color combinations you want.

I decided to simply paint the fuse instead of printing the tip in multiple colors.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.8mm
Infill:
20%
Filament brand:
Inland
Filament material:
PLA
Notes:
If you want a nice clean round bomb, print at the smallest resolution possible for your printer. It shouldn't need any supports anywhere.

I used 3 perimeters and 35% infill for some extra heft, but you can cut print times down by going to 2 perims and 20% infill easily.