后视镜支撑系统
Rearview Mirror Support
2024-03-19 12:10:29
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I designed this support for my car additional rearview camera mirror because the original wont adjust enough in order to being able to see the back windshield comfortably. The idea is to put the supports between the original mirror and the additional, this would give more range of adjustment due to the inclination.
I used ABS due to the higher temp resistance of material because the interior of the car could get to the malleable temperature of PLA.
As suggestion, I recommend using an infill pattern that bring stability to the top of the support because it would be under constant pressure.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Yes
- Supports:No
- Resolution:Standar Quality 0.12
- Infill:20 %
- Filament brand:
-
- Filament color:
-
- Filament material:
ABS
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Tigersclaw《星际公民》2023-03-26 -
僵尸套件卡2023-03-26 -
2023年度EDC手镯饰品2023-05-10 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
南斯拉夫纪念碑Podgarić2024-04-22
最热下载
-
Wolf系列手机支架2025-07-16 -
Arduino或5V继电器控制板固定架2024-04-02 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
比基尼模型2025-07-16
最新模型
-
裸女站立2025-07-16 -
骰子镇的金矿石2024-05-08 -
显卡支持2024-05-08 -
ABS 1.5英寸盖2024-05-08 -
小型室内篮球筐模型2024-05-06