坚固盒子，专为理论11及其他大多数扑克牌设计。
Rugged box for theory 11 (and most other) Playing cards
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
As an avid card collector I needed a way to store and carry my decks. I loved the original, but my problem was it would not hold the cards in the tuck box (it would damage the box at the least), so I used a deck from Theory 11 deck for measurements and also made logos on the tops to match SOME of my collection (I'll add more as I make them).
Summary
A specialization of
https://www.thingiverse.com/thing:5207932
For poker sized cards with tuck box
assemble
Use raw 1.75mm filament in hinges to assemble parts.
Its tight, I used clamp to slide it in.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:.2 mm
- Infill:30% or higher
- Filament brand:
BUMAT
- Filament color:
Silver
- Filament material:
PLA or PETG
Post-Printing
Use raw 1.75mm filament in hinges to assemble parts.
it's a tight fit
Tags
相关内容
联系我们
热门推荐
-
骑士之魂2023-03-26 -
兰博基尼全新品牌标识2024-04-01 -
Elegoo Phecda 十字光标激光模块与空气辅助管支架2024-04-06 -
我对Ring的爱2024-05-05 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
单18350型号电池的盒子2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Arduino或5V继电器控制板固定架2024-04-02 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
CZ455 452 512 弹匣底板2024-04-22
最新模型
-
Enders 3版控制面板2024-05-08 -
里奥兰德350瓦特6-60V PWM DC 无刷电机速度控制器安装基座2024-05-08 -
简约墙面键帽展示架2024-05-08 -
埃及风格卡坦岛棋子2024-05-08 -
外部电机用鼓风机2024-05-06