GX470后门拉把插件部件

GX470 Rear Door Pull Insert Piece

2024-03-20 13:47:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My 2005 GX470 rear door pull broke, but I didn't see any paracord door pulls that worked like the OEM version and inserted through the sheetmetal squares. I think everything required removing the door panel to mount a bolt behind the sheetmetal. So I designed this door pull insert piece and went through a dozen or so variations of this until I had a solid attachment to the door and holes to tie the paracord to.

Works on my 2005 GX470 rear door. The square holes in the sheetmetal aren't the same, so there are 2 heights in the STL files so they fit snugly. I printed with supports and then removed the supports from the through-hole, but it would probably print fine without supports. The through-hole was designed for a M5 x 0.8 x 30mm bolt (from the Harbor Freight metric bolt / washer / nut kit).

I used the 3d printed insert ends and followed "cobra" paracord bracelet instructions to make the pull. I spaced the knobs about 22cm apart and the tails were 140cm long. So about 325cm total paracord to make this. Give yourself a little extra and you can always cut the excess.

Print Settings

Printer brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
Yes
Resolution:
0..3
Infill:
100
Filament brand:
COLIDO
Filament color:
Brown
Filament material:
PETG
Notes:
I originally printed in PLA and it worked well. But living in California the car gets wicked hot during the summer, so I bought some brown PET to go with my beige interior. It looks better and should hold up better! Supports seem optional, and I printed a 2 line skirt. Had good adhesion to the heated glass surface for me.