工具持有器

Tool Holder Organiser for screw drivers hex torx drivers etc

2024-03-20 16:54:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a tool holder I designed for long drivers such as Hudy that sit high up at the back of this tool holder. I fit shorter screw driver and torx drivers in the middle and front, but you can put whatever you like in them. There is a rear foot for stability and a radius around the top of the hole to make it easier to insert tools.

This is quite a lightweight tool stand using 97 grams of PLA filament and prints without the need for support.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.20
Infill:
10%
Filament brand:
Any
Filament color:
Your choice
Filament material:
PLA

Post-Printing

Clean up

If there is any stringing, I find the easiest way to remove this is with a heat gun.
Just use a high heat and wave it briefly around the structure until the fine strings disappear.