SFP 3D建模教程

SFP Book

2024-03-20 22:46:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As you can see from some of the pictures here, we have a LOT of SFP modules at work and storing them was definitely becoming a problem. A few months ago I had printed out an SFP storage tray that I found on here, but quickly realized the problem with it was that you couldn't see the sides of the modules when they were in the tray so to find the one you needed you had to go through and pull each one out and look at it.

I was thinking about how to organize them in a way more accessible and came up with this design.

Each "Page" of the book holds 10 SFP modules (8 for a QSFP page) and they fit in their slots quite tightly. You can see in one of the pictures that they generally will stay in there even with the "page" upside down. Be warned due to variations in the size and such of SFP modules, some will not fit tightly and CAN fall out.

If one of the SFP's is stuck in the slot, you can put your finger in the slot under the connector end and push it out.

To bolt the pages together into a book you will need 2 x 30mm long M3 cap head screws and 2 x M3 nuts. Place a nut into the hexagonal recess and then run the bolt through the barrels to hold it altogether.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
15%
Filament brand:
Esun
Filament color:
Black
Filament material:
PLA+
Notes:
Print upside down, with the top flat face on the bed, and you won't require any support matierals.