香槟酒杯挂钩

Champagne Flute Hanger

2024-03-21 00:12:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this champagne flute hanger to fit the flutes i bought. Their diameter at the base was 70mm. Your mileage may vary. Id recommend first printing the Champagne_Glass_Rack_Test.3mf, which is a small section of the piece to ensure your champagne flutes will fit. It also includes the screw hole so you can check which screws would fit. For reference, the screw hole is 4.1mm, and the hole to accommodate the screw's head is 8mm

Highly recommend printing it standing up as this will result in the strongest print. Supports are not needed.

I also included the .prt file, which can be opened with Siemens NX if you want to edit the CAD file. Unsure if it plays well with other programs.