手机握子 - 柔韧且仅1.4毫米厚
Phone grip - Flexible and just 1.4mm thick
2024-03-21 00:12:26
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I was initially inspired by this design https://www.thingiverse.com/thing:3208913 but wanted to create something even better.
That's why I designed this phone grip, which has a thickness of only 1.4mm!
Despite its thinness, it's still comfortable to use and very durable. Additionally, it's very easy and quick to print.
I hope you enjoy this project!
Print Settings
- Rafts:No
- Supports:No
- Resolution:0.1mm
- Infill:100%
- Filament brand:
- Filament material:
Body: PLA/PETG - Flex: TPU
- Notes:
Print the body upside down without supports.
Post-Printing
Apply double-sided tape to the bottom and trim off the excess
Tags
License
CC BY-NC
Phone grip - Flexible and just 1.4mm thick
by mike91r is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
安装电缆固定装置2023-05-09 -
阿卡纳森的军团GO定制背板2024-03-21 -
海洋之滴 Boargame 天文仪室2024-03-21 -
Fidget 3D模型2024-04-24
最热下载
-
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
鞋撑2025-07-17 -
艺术雕像（女性）2025-07-16