4-1型号聚乙二烯四氟乙烯适配器

4-1_PTFE_Adapter

2024-03-21 02:47:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Basically got tired of waiting for this to come back in to stock. Its a little longer than it probably need to be but works well. I say longer because for the P1S with enclosure the tube sticks out the back and the distance between the tube and screw locations is a little shorter than I made this. But if you look at the Bambu pics, on the P1S its not screwed on. The P1P(no enclosure) PTFE tube comes out the top, hence the rotation slot for mounting. This should work just fine for that.

The other reason I made this is the other designs out there have the through holes too small. There is no need for tight tolerances there so mine are at 4mm. And only tapers where the filament goes in to the single end (see section analysis pic)