Sodastream喷泉式容器

Sodastream Funnel with counter

2024-03-21 04:53:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I got a sodastream as a birthday present. It's great, but it's hard to pour water without spilling it. I decided to design and print a funnel. Of course, it can't be too simple and I added a gadget: a counter for filled (or rather drunk) bottles. The funnel also has air bleeding channels.

There are numbers around the circumference indicating the number of filled bottles. The dots are intended to show dozens (10, 11, etc.), but they can also be used to mark incomplete bottles.

Funnel printer settings: 0,2mm without supports and 2 walls
Pointer. 0,12mm with suports and raft because i print it in vertical position for better quality. Raft is required because it's small and adhesion it's bad.