BMW e9X xDrive Shifter Linkage Bushings

2024-03-21 12:03:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These fit inside the shifter linkage of any xDrive model e9X vehicle with a manual transmission. They may fit other xDrive vehicles equipped with a manual but that is up to you to test. The only confirmed vehicle is my own personal manual e91 xDrive car.

It is highly recommended to print this with 100% infill and absolutely recommended to print with a strong heat resistant material like ASA or Nylon and increase the scale by ~1-2% depending on your material choice, printer, environment, etc. For ASA and my Ender 5 S1 I printed at 101% and it fit perfect.

I also printed with a semi-large brim on the outside of the print to help prevent lifting, this step is negotiable depending on your printing environment.

You may have to sand or clip the outer portion of it slightly once it is pressed into the shifter linkage. I just slightly clipped the bottom to make sure there was clearance but you may be able to get away without it too. I haven't tried.