2005特斯拉Mustang中控旋转盖3D模型

2005 Mustang Spinner Center Cap

2024-03-21 20:18:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Looking to spice up your OEM 2005 Mustang rims? Does it look like something is missing on your OEM rims but can't figure out what it is? Then I have the right thing for you. All jokes aside, I modeled and printed the center cap “spinners” from the 2005 mustang stock rims. I did not want to pay $30 for knockoffs or the $200 ones from Ford so I made my own.

For people looking to print this for non Ford Wheels: Ford says their snap in center caps are “2.262 inches” or “2.54 inches” for the snap lock in. It should fit in any wheels with that center

Before and After: pictures are 3 - 5 (the before is just an image of new rims, but you get the idea)

Ideal Materials
-Spinner - print in any material besides TPU (Mine is PLA+)
-Center Cap - Best results printed in nylon for a stiff but small flex for a good fit. PLA+, PET, PETG, or ABS would be good, just be careful when installing to not break any mounting pegs that go into the hub.
-Optional: Print “Spinner” in Silver PLA if you don't want to paint it, it doesn't blend in as well as painted, but it works.

Tips for installation
-It many need some persuasion to fit the printed center cap in the center of the hub on the wheel as it was modeled to be a tight fit so it wouldn't fall out while driving so I used a rubber mallet to lightly tap it in place. Be very careful doing this if you do not intend on printing in nylon
-The locking mechanism that combines the "Center Cap" piece to the “Spinner” piece should be a tight enough fit to stay on. If it's too lose you may need to reprint but it should be fine. I tested them for a couple days on my car and they haven't gone anywhere

-The 3mf and STEP files will also be in this included so you can remix this design or edit it to make it better.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
Doesn't matter
Filament brand:
Hatchbox
Filament color:
Grey
Filament material:
PLA and Nylon
Notes:
-Printer: Ender 3 V2 with Spider v3 full metal hotend, dual gear extruder and PEI build Plate and Lulz Bot Taz Workhorse for nylon (not that this matters).
-I used the preset profiles from Prusa for my print temps and speeds.
-Spinner Layer Height: 0.16 mm.
-Center Cap Layer Height: 0.20mm.
-See the screenshot from PrusaSlicer for proper support placement and blocking
-Supports: on build plate only

Post-Printing

After Printing to get a factory looking finish

-Sand with 220 grit sandpaper for a really smooth finish
-If printing out of Dark material: Base coat with primer or white spray paint
-Spray Paint with a close matching silver (I used Rust-Oleum Bright Coat Metallic Finish)
-Do a few coats of the paint for protection (with the paint I used, a clear coat didn't apply right and had to strip the paint and restart).
-Optional: find an emblem sticker to put in the center cap (the model accounted for it)