杰比尔 Vista 2 替换销
Jaybird Vista 2 Replacement Hinge
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The hinge on my Jaybird Vista 2 headphones broke (again) and supergluing the original hinge back together did not work for more than 2-3 openings.
I designed this to replace the hinge, so the original hinge needs to be completely broken/cut off because this one hinges a few mm behind the original.
This does not affect the ability to wirelessly charge as it doesn't go past the bottom of the hinge.
Mine is currently held on with Museum putty (like really sticky sticky-tack) because I was testing it before glueing, but the tack is holding, so I'll stick with it until I need to glue it.
The hinge works with a piece of 1.75mm filament threaded through the holes.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V2 Neo
- Rafts:No
- Supports:Yes
- Resolution:any
- Infill:15%
- Notes:
I used organic supports, but whatever your preference should be fine.
Tags
相关内容
猜你喜欢
联系我们
最新模型
-
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24 -
电动锁钥匙2024-05-08 -
磁铁支撑块2024-05-08 -
专业版 React 17 无刷电动升级2024-05-06 -
用于排水渠道的格栅（80毫米）2024-05-06
最热下载
-
红眼鳄鱼蜥蜴可拼合骨架3D模型2023-03-26 -
小鸡绘画机（Eggbot衍生版）v1.12023-03-26 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
泰坦电视核心升级2024-05-02