3D模型：平面生活得分计数器V2

Flat life/score counter V2

2024-03-21 22:26:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Small (6,8 x 3,3cm x 0,4cm) Flat Life / Score Counter - V2
Keychain included in files

Compared to old version new one is bigger and with different mechanism that should work better

My Tabletop collection - including 3-digit counter of the same mechanism
https://www.printables.com/@C47_3d/collections/145257

You need one top and bottom part (normal or keyring version) and 2 wheels (normal or weak)
Parts have markings (I and II) to let you know where each wheel should go
Assemble upside-down (digits not visible)
Bottom and top parts should snap together

‘Wheels-weak’ are easier to use - less force needed for rotating
You can also use Horiontal Expansion (XY compensasion) when printing wheels to change this needed force. Negative values (like maybe -0.02) will make it easier to use
Use this also if you will have problems with assembling (parts too loose or to hard to assemble)
The same if you want to resize the models - you will need to test the values that will work for you

Print Settings

Notes:
Made for 0,4mm nozzle
No supports needed
0.1 or 0.2mm layer height (slight variations may work too)

Change filament color for layers with digits
Top and bottom parts can be printed this way too (as on photos) or sepparate with just one color

Looks really nice with transparent filament as base color

The force needed to move the wheels depends on filament, printer calibration and slicer settings
If it's too hard to rotate wheels you can use a weak spring wheels version (it's 0.4mm thick instead of 0.8mm) or a horizontal expansion (xy compensation) - maybe something like -0.02 or so will help
Resizing the models may help too. You can try something like 100.5% for easier or 99.5% for harder rotating