3D模型：调色器专用按摩枪
Paint Shaker for massage gun
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this to shake the most common paint brands. The bottom of the bottle should face the massage gun.
You'll need a rubber bushing of the style used on other massage gun attachments.
I shake at maximum speed.
Heavier pigments may require several minutes to fully loosen.
I add good quality stainless steel balls to my paint bottles as well. Shake for 30-60 seconds after you hear the ball rattle.
I haven't tried a filament print, but I believe it should work just as well.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO MARS 2
- Notes:
Neither the resin type, nor the settings, should be very critical.
The shaft is hollow, which allows the resin to easily drain during the build.
Filament printers should work just as well. Please leave comments if you have feedback on that.
Post-Printing
I rubbed the resin print down with cornstarch to smooth the action of the threads.
How I Designed This
I wanted to ensure that I could shake paint without making a mess. This is fairly similar to the approach taken by large commercial paint shakers.
Tags
License
Paint Shaker for massage gun
by rancegt is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
全能3D打印机测试2023-03-26 -
Huion Kamvas 24 Plus 配件支架2023-04-04 -
负数块键盘升起2023-04-26 -
手机和平板支架套装2024-03-17 -
被放逐的雕刻2024-04-24
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GLOCK 17（第三代）蓝枪2024-04-13 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
沙箱建筑模型2024-05-08
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
比基尼模型2025-07-16 -
天使和恶魔2025-07-16 -
一体打印行星齿轮2025-07-15
