漂移流畅轮毂皮肤

Drift Slick Wheel Skin for Traxxas RC Truck

2024-03-22 08:49:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a slide on 'Skin' that fits the OEM rubber wheels of a Traxxas Stampede. The RC truck I have them on is a 2WD version, I don't know if the 4WD version has the same wheels or not... you tell me.

I printed all 4 out of ABS, each one was ~25hours to print and weighs ~190 grams when printed solid. I printed them solid to try and get the most life out of them, but these things wear like a pigs nose. Probably have a couple miles on them already and they're just scuffed a little! Plenty of life left in them.

The 2WD I have with the LIPO battery behaves great! Almost like driving around on ice to be honest. I am still learning the drifting part of it, a little more practice to get them just right I think...

These literally slide on, just compress the tire a bit when sliding them on and the wheel grips the inside of the sleeve to hold it in place.

Download the file and measure it up against your RC vehicle's wheels (if not a Stampede).

I don't see why different patterns couldn't be put on the outside of the wheel either, such as paddles for sand on the rear, then a set of sand fins on the front. If you make something neat let me hear about it!

I put together a video showing my journey in making these if you're interested:
https://youtu.be/F9u--u6ttXQ

Oh yeah, obviously you could print a set of 2 skins for the rear only, or print 4 and cover all 4 wheels.

Just Have Fun!