Jeti DS-12 3D模型：无线电传输站模拟

Jeti DS-12 transmitter stand

2024-03-22 18:45:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This stand was originally designed for the X9D and it fits perfectly on the Jeti DS-12 handle.
the shared design does not require threaded inserts when using an M3 bolt. for durability and a better ability to adjust the stiffness of the handle it is recommended to use M3 threaded inserts. you will need to drill out 4mm from the stand holes to get the threaded inserts

m3 bolt size: min M3x12

I have made the infill 60% to assure the stand is strong