简单推动块

Simple Push Block

2023-03-26 18:45:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I needed a pair of simple push blocks to be used with a jointer. Couldn't find something similar to what I was looking for so did the next best thing.

This design is a simple push block mostly to be used in woodworking. I borrowed the handle from design www.thingiverse.com/thing:2056511, and sunk it a couple of millimeters into the base.

The squares are there to save filament. Finished design is about 160 mm x 70 mm

I used support set to everywhere, and the handle came out pretty good, with only a minor cleanup

I used contact cement to attach scouring pads to the bottom for extra grip. Any other rubber or method of attachment would also work.

No hardware required for assembly. This prints as a single piece.

简单推动块

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型