Bitfenix 3.5" HDD Bracket/Caddy

2024-03-23 03:48:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

HDD mount for a Bitfenix Prodigy case.

Tested on my case from 2013, no promises about later models.

I tried using this Cooler Master caddy, but the locking tabs were a bit too far forward, and the squeeze arms interfered with the HDD. I pushed the tabs back a bit and gave more flex to the squeeze arms, and now it holds nicely, but can still be released.

HDD has to be screwed from below. Tested using a WD Red drive, with SATA and power connectors on the same side as the arms (towards you when sliding this in).

In-use photos coming eventually.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
0
Filament brand:
n/a
Filament color:
n/a
Filament material:
PLA
Notes:
Lower layer height would be better, but I didn't want to wait, and 0.2mm worked well enough.