拇指螺丝头

Thumb Screw Head

2024-03-23 15:40:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If all you want is a bolt that can be thumb tightened, here is a way to get there. The M4 bolt I used has a hex head with measurement of about 7mm across (flat-to-flat) and a depth of 3mm. My thumb screw part sits around the bolt head which can be secured with a suitable glue, eg. CA glue, Epoxy resin.

My print is made in 1.75mm eSUN PLA+ filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. Print supports are not required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Tags

License

CC BY-NC

Thumb Screw Head
by wisestone is licensed under the Creative Commons - Attribution - Non-Commercial license.

拇指螺丝头

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型