不锈钢杯子托盘杯架

Stainless Steel Cup Holder Housing Mug Koozie

2024-03-23 17:48:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This was originally designed to be for a smart cup that uses a Raspberry Pi and a screen, but I realised that it would also make a really good drink cup too. I have only printed the more complex version of this with cut-outs for the screen etc, and you can see loads of photos of that in the remix.

It makes use of the stainless steel NON-double-walled cups that are all over Amazon etc very cheaply. That way you can take them out and wash them and not have 3D printed filament touching your lips. https://www.amazon.co.uk/dp/B0BR1ZF79S

It will be insulated from your hand with the air-gap between the metal cup and the outer cup, but you could always put cushion filling or spray-foam in there to improve the insulation even more!

I'd advise against using it for hot materials, but if so, PETG would be a better choice. You should use supports for the top of the handle and maybe the curve at the bottom of the handle, but apart from that it's very easy to print.

I used PLA+ and it seems strong. I wouldn't advise weaker filaments like silk. I like to print with 0.6mm layer width and this is optimised for that, but you can always experiment with different widths and preview to make sure that you don't have gaps between your walls. Have at least 3 or 4 shells for strength. The only part that should get infill is the handle, but I'd recommend 20% for strength.

不锈钢杯子托盘杯架

朋友，你觉得上面这个模型，属于下面的哪个分类？