3dsjs

Roly Lasermatic MK2 支持架构 - F360

Roly Lasermatic MK2 Risers - F360

2024-03-23 21:52:17

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

The Roly Lasermatic MK2 diode laser has an opening in the bottom to allow larger items to be engraved. I made these risers to position the MK2 higher so that larger objects could be placed under the machine. The included small shim can be used to prevent scratches on the legs. This model raises the laser 75mm, but the original F360 file is included with user parameters allowing for easy modification of all dimensions.

Parts required:
M3 - 12mm socket head cap screws (4)
M3 threaded brass inserts (4) Check the required hole diameter. Not all inserts are the same.

The shim can be secured with just a spot of CA on the upper edge, but it is not necessary. The knob has molded M3 threads but you might need to chase them with a tap. Tightly screw the M3 bolt all the way into the knob and it should be OK, but a drop of CA can be used if needed. I've used similar knobs on many other projects and have never needed to use glue.

Tags

License

CC BY-NC-SA

Roly Lasermatic MK2 Risers - F360
by HDVideo is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Roly Lasermatic MK2 支持架构 - F360
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢